Add QMP/HMP support for rocker devices.  This is mostly for debugging purposes
to see inside the device's tables and port configurations.  Some examples:

(qemu) info rocker sw1
name: sw1
id: 0x0000013512005452
ports: 4

(qemu) info rocker-ports sw1
            ena/    speed/ auto
      port  link    duplex neg?
     sw1.1  up     10G  FD  No
     sw1.2  up     10G  FD  No
     sw1.3  !ena   10G  FD  No
     sw1.4  !ena   10G  FD  No

(qemu) info rocker-of-dpa-flows sw1
prio tbl hits key(mask) --> actions
2    60       pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e
2    60       pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00
2    60       pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58
3    50       vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60
2    60       pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58
3    50  1    vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60
2    60       pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00
3    50  2    vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60
2    60  1    pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1
3    50  2    vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60
2    60  1    pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1
2    60       pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58
3    50       vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60
2    60       pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58
3    50  1    vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60
1    60  173  pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000
1    60  6    pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000
1    60  174  pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000
1    60  174  pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000
1    60  6    pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000
1    60  181  pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000
1    10  715  pport 2 --> apply new vlan 2 goto tbl 20
1    60  177  pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000
1    60  174  pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000
1    10  717  pport 1 --> apply new vlan 1 goto tbl 20
1    0   1432 pport 0(0xffff) --> goto tbl 10

(qemu) info rocker-of-dpa-groups sw1
id (decode) --> buckets
0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000]
0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1
0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2
0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0
0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0
0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000]

[Added "query-" prefixes to rocker.json commands as suggested by Eric
Blake <eblake@redhat.com>.
--Stefan]

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>